从底部放量的个股找黑马股【附带选股指标】

我们从底部适度放量的个股中挑选黑马．要知道成交量放大是否适度，可以参考以下指标，作为选股的标准。

研判技巧

(1〉股价启动初期，单日成交量大于该股的前5日移动平均成交量的2.5倍，大于前10日移动平均成交量3倍。

(2股价启动初期的单日盘中量比至少要达到10以上,收盘时量比至少要达到2.5以上。

( 3）股价启动初期成交量保持温和放大状态，量能乖离率指标VBIAS能够保持3~5天的快速持续上涨，并且在股价启动后的—段时间内，24日 VBIAS能多次穿越О轴线。

(4）移动平均成交量VOSC指标大于0轴线，并且逐渐缓慢上移、即使偶遇调整，vOSC指标为正值的时间远多于为负值的时间。

(5）成交量标准差指标VSTD快速上升到该股历史上罕见的极高位置时，表示该股成交量过度放大。这种极高位置由于各种股票的流通盘大小不同和成交活跃度不同而有所不同，所以没有一定的量化标准，投资者可以根据个股的VSTD指标历史表现进行比较。

(6）底部放量个股的成交量虽然和前期相比有明显的增加、但和个股的流通盘相比并不大，每日成交换手率不能超过10% 。

XA_1:=(EMA(CLOSE,12)-EMA(CLOSE,26))*100;

XA_2:=EMA(XA_1,9);

XA_3:=2*(XA_1-XA_2);

XA_4:=CROSS(XA_1,XA_2);

XA_5:=IF(DATE<2342.459961*500,1,1);

XA_6:=EMA((CLOSE-MA((2*CLOSE+HIGH+LOW)/4,30))/MA((2*CLOSE+HIGH+LOW)/4,30)*100,3);

XA_7:=IF(CROSS(XA_6,0),40,0)*XA_5;

XA_8:=(2*CLOSE+HIGH+LOW)/4;

XA_9:=LLV(LOW,94);

XA_10:=HHV(HIGH,89);

XA_11:=EMA((CLOSE-XA_9)/(XA_10-XA_9)*100,8);

XA_12:=EMA(0.667*REF(XA_11,1)+0.333*XA_11,10);

XA_13:=COUNT(XA_7>=40,5)>0;

XA_14:=IF(CROSS(XA_11,XA_12) AND XA_13,60,0)*XA_5;

XA_15:=XA_7+XA_14>=1;

XA_16:=MA(CLOSE,5);

XA_17:=MA(CLOSE,30);

XA_18:=MA(CLOSE,5);

XA_19:=MA(CLOSE,13);

XA_20:=MA(CLOSE,34);

XA_21:=IF(DATETODAY(DATE)<9890,1,1);

XA_22:=ATAN((XA_18/REF(XA_18,1)-1)*100)*180/3.1416;

XA_23:=ATAN((XA_19/REF(XA_19,1)-1)*100)*180/3.1416;

XA_24:=ATAN((XA_20/REF(XA_20,1)-1)*100)*180/3.1416;

XA_25:=SMA(EMA((XA_18-REF(XA_18,1))/REF(XA_18,1),3)*100,3,1)*XA_21;

XA_26:=EMA(XA_25-REF(XA_25,1),3)*XA_21;

XA_27:=(CLOSE-XA_16)/XA_16*100;

XA_28:=(CLOSE-XA_20)/XA_20*100;

箱体突破抓上升趋势强势股带指标

XA_29:=COUNT(CROSS(XA_27,0),3)>=1 AND XA_28>REF(XA_28,1) AND XA_16>REF(XA_16,1) AND (CLOSE/REF(CLOSE,1)-1)*100>5 AND REF(CLOSE,1)

XA_30:=FILTER(XA_29,10)*XA_5;

XA_31:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100>9;

XA_32:=MA(CLOSE,5)*XA_21;

XA_33:=REF(CLOSE,1)*XA_21;

XA_34:=SMA(MAX(CLOSE-XA_33,0),6,1)/SMA(ABS(CLOSE-XA_33),6,1)*100;

XA_35:=CROSS(XA_34,25)*XA_5 AND CLOSE>XA_32 AND XA_31;

XA_36:=HHV(EMA(VOL/5,4),240);

XA_37:=LLV(EMA(VOL/5,4),240);

XA_38:=MA(CLOSE,35);

XA_39:=EMA(CLOSE,15)-EMA(CLOSE,30);

XA_40:=EMA(XA_39,12);

XA_41:=2*(XA_39-XA_40);

XA_42:=(CLOSE-LLV(LOW,12))/(HHV(HIGH,12)-LLV(LOW,12))*100;

XA_43:=(CLOSE-LLV(LOW,45))/(HHV(HIGH,45)-LLV(LOW,45))*100;

XA_44:=(CLOSE-LLV(LOW,225))/(HHV(HIGH,225)-LLV(LOW,225))*100;

XA_45:=SMA(XA_42,3,1);

XA_46:=SMA(XA_43,15,1);

XA_47:=SMA(XA_44,45,1);

XA_48:=MACD.MACD>0;

XA_49:=(XA_47-REF(XA_47,1))*50;

XA_50:=(XA_46-REF(XA_46,1))*10;

XA_51:=REF(XA_46,1)-REF(XA_47,1);

XA_52:=(XA_46-XA_51-XA_47)*30;

XA_53:=XA_45-REF(XA_45,1);

XA_54:=EMA((EMA(VOL/5,4)-XA_37)/XA_37*XA_38,13)*XA_5;

XA_55:=EMA((XA_36-EMA(VOL/5,4))/EMA(VOL/5,4)*XA_38,13);

XA_56:=XA_41>=(-0.035) AND XA_41<=0.045 AND CLOSE>MA(CLOSE,5) AND CLOSE>MA(CLOSE,10) AND XA_55>(-100);

XA_57:=EXIST(CLOSE/REF(CLOSE,1)>1.055,60)*XA_5;

XA_58:=IF(XA_56 AND XA_53>7 AND REF(XA_53,1)<0 AND XA_53-REF(XA_53,1)>9,1,0)*XA_21 AND XA_57 AND XA_48;

XA_59:=(CLOSE-REF(CLOSE,2))/CLOSE>0.1;

XA_60:=REF(XA_59,(-2));

XA_61:=CLOSE/REF(CLOSE,1)>1.048 AND CLOSE=HIGH AND BETWEEN(FORCAST(VOL,4),0.2*FORCAST(VOL,12),2.1*FORCAST(VOL,5));

XA_62:=FILTER(XA_61,28)*XA_5;

XA_63:=AMOUNT/(VOL*100);

XA_64:=EMA((XA_63-LLV(LOW,34))/(HHV(HIGH,34)-LLV(LOW,34))*100,13)*XA_21;

XA_65:=EMA(0.667*REF(XA_64,1)+0.333*XA_64,2);

XA_66:=EMA(XA_65,10);

XA_67:=EMA((XA_63-LLV(LOW,34))/(HHV(HIGH,34)-LLV(LOW,34))*100,8);

XA_68:=EMA(XA_67,5);

XA_69:=IF(1.25*MA(HHV(MA(XA_63,4),10),3)-0.25*HHV(MA(XA_63,4),10)>HHV(MA(XA_63,4),10),HHV(MA(XA_63,4),10),1.25*MA(HHV(MA(XA_63,4),10),3)-0.25*HHV(MA(XA_63,4),10))*XA_21;

XA_70:=IF(1.25*MA(LLV(MA(XA_63,4),10),3)-0.25*LLV(MA(XA_63,4),10)

XA_71:=IF(CROSS(CLOSE,XA_70)+CROSS(CLOSE,MA(CLOSE,13))=2,1,0)*XA_5;

XA_72:=IF(CROSS(CLOSE,MA(CLOSE,13))+CROSS(CLOSE,XA_69)=2,1,0)*XA_5;

XA_73:=FILTER(XA_71+XA_72>0,0)=1;

启动:XA_30+XA_4+XA_35+XA_62+XA_73>=4,COLORRED;